At the detection distance but not large enough to detect, then the detector will not be able to see the gap again. Deep search detector models can detect underground, closed, airtight, naturally formed or artificially formed cavities within the detection distance. If the gap is not within the detection range, it will naturally not be detected by the detector. As with metal, it affects the depth of space in the soil structure. The larger the gap, the more deeply it can be detected. You can detect gaps with the detector. You basically cannot detect places with open mouths with a detector.
The gold and treasure detectors we use are actually metal detectors. Metal detector can be seen in different areas. It will not show any effect against objects and objects. The metal detector industry is very widespread around the world and is divided into different branches. A metal detector is basically a detector produced to detect metal. Non-metal board, plastic etc. Metal detectors used for security purposes, metal detectors used for parking sensors in cars, etc. It is used to detect metal objects and objects.
You can consult the museum directorate you are affiliated with for information about what happens with the detected items and for up-to-date information on other issues. Users who want to carry out licensed excavations must first go to the museum directorate in the province they are affiliated with and state that they want to excavate a treasure. Once you have collected all the necessary documents and paid the fee, you will be granted an excavation permit. Situations that may interfere with the work can stop the excavation and then continue. The excavation permit cannot be sold or transferred to anyone else. Excavation permit is given for a certain area. For example, it does not cover a large area such as 1kmx1km, the excavation can be done for a certain day and if natural factors enter the work, for example, excessive rain etc.
In the mid-1980s, Doug Scott's groundbreaking work on the Battle of the Little Bighorn demonstrated the utility of metal detection and its usefulness as an archaeological method in reconstructing battlefield landscapes. But as science and technology improved, the modern development of metal detectors began in the 1920s. It was also used in the Battle of El-Alamein, Operation Overlord, the Allied invasion of Italy, and Operation Husky. It was produced in 1874 by Trouvé, a French-born electrical engineer and inventor, to locate metal objects such as bullets in the human body, the prototype of today's metal detector. However, although the detector worked properly, it could not locate the bullet as the bed on which American President James Garfield slept was metal. Inspired by Trouvé, Alexander Graham Bell developed and used this metal detector in 1881 to try to locate a bullet lodged in the chest of American President James Garfield. It was first used by Benito Mussolini to find the belongings of Emperor Caligula at the bottom of Italy's Lake Nemi, and later to find the belongings of explorers who came before him during Admiral Richard Byrd's Second Antarctic Expedition. While metal detectors are used in archeology to find metal artifacts, in 1958, Don Rickey, a military historian, used a metal detector to map the location of the Battle of the Little Bighorn. Apart from this historical process, metal search detectors II.