The device shows the data it receives and the user tries to understand what is happening by analyzing the differences there. The basic things that the user can learn from the data received in the underground imaging products are soft soil, void, water, fill, excavated closed place, wet ground, rock, metal, structure, tunnel, cellar, etc. There is no metal discrimination, the comment made by the user after the analysis of the incoming data is important. They measure the magnetic field vectors coming from underground using magnetic sensors. Underground imaging systems are not like detectors and field scanning. The user can reach these conclusions by analyzing the measurements he made and the data he received. is It does not overwrite the data received from the device in this way.
If the gap is not within the detection range, it will naturally not be detected by the detector. Deep search detector models can detect underground, closed, airtight, naturally formed or artificially formed cavities within the detection distance. You basically cannot detect places with open mouths with a detector. As with metal, it affects the depth of space in the soil structure. At the detection distance but not large enough to detect, then the detector will not be able to see the gap again. The larger the gap, the more deeply it can be detected. You can detect gaps with the detector.
There are different depth tests that we perform in deep search detectors, and the final test is 350cm in the form of 1, 2, 3 meters. Depths vary according to the size of the metal, its type, the duration of being under the ground, and the soil structure. We often hear from you the question of whether the detector goes deep. As the metal grows, you can detect from the depth, and as it gets smaller, you can detect it from the surface. There are different depth tests we do for deep search detectors, but of course depending on the depth logic.
It is used to detect metal objects and objects. Metal detector can be seen in different areas. The gold and treasure detectors we use are actually metal detectors. Non-metal board, plastic etc. Metal detectors used for security purposes, metal detectors used for parking sensors in cars, etc. It will not show any effect against objects and objects. The metal detector industry is very widespread around the world and is divided into different branches. A metal detector is basically a detector produced to detect metal.